Key Features
l Flush mounted design for clean room applications
l Accuracy < 0.5% of reading
l Two wire system with current output
l Stainless steel housing to IP64
l PC configurable for range, display and calibration
l 嵌入式安装设计，适用于洁净室应用
l 准确度<读数的0.5％
l 带电流输出的双线系统
l 不锈钢外壳，达到IP64
l PC可配置范围，显示和校准
With the FCO342 flush mounted Differential Pressure Transmitter, Furness Controls provides an all in one pressure transmission and local indication solution, meeting the requirements of reduced cost, footprint and instrumentation on site. Both outputs of measurement ,which included the linear analogue signal and 4 digit display, are within 0.25% of accuracy at the operating pressure of 10 Pascal, or 0.03 Pascal in SI terms.
通过FCO342嵌入式差压变送器，Furness Controls提供一体化压力传输和本地指示解决方案，满足现场降低成本，占地面积和仪器的要求。测量的两个输出，包括线性模拟信号和4位数显示，在10帕斯卡的工作压力下，精度的0.25％，或以SI表示的0.03帕斯卡。
The FCO342 uses the proven capacitance-based transducer design for long term reliability and repeatability.
FCO342采用成熟的基于电容的传感器设计，具有长期可靠性和可重复性。
Quick installation and verification
Compared to other products, the FCO342 provides a quicker installation and ongoing verification process:
The linear output signal and display are verified with the Building Management System at a single source.
Integrated calibration ports to carry out instrument calibration without the need to disconnect the impulse lines, minimising disruption to ongoing processes.
Separate local indications are redundant, resulting in reduced instrumentation and subsequent calibration overhead.
快速安装和验证
与其他产品相比，FCO342提供更快的安装和持续的验证过程：
线性输出信号和显示器通过单一来源的楼宇管理系统进行验证。
集成校准端口，无需断开脉冲线即可进行仪器校准，最大限度地减少对正在进行的过程的干扰。
单独的本地指示是多余的，导致仪器减少和随后的校准开销
